- 11 amp reciprocating; variable speed (0-2,800 stroke per minute); quick-lock blade clamp
- 3/4-inch stroke length; double bearing wobble plate reduces vibrations; center pivot adjustable shoe
- Rubber boot for enhanced grip
- Includes saw, 1 blade and case
Product Description
Milwaukee’s 10 Amp Sawzall Reciprocating Saw is the most durable reciprocating saw on the market, and at only 7 pounds, it offers the best power to weight ratio in its class. The saw offers a 0-2800 strokes per minute variable speed trigger with 3/4 in. stroke length. The rubber boot provides superior gripping, and the adjustable shoe provides longer blade life and more cut control. The blades can even be clamped upside down for special cutting needs. Cordless: No, Volts: 120, Amps: 10, Variable Speed: Yes, Stroke Length (in.): 3/4, Strokes Per Minute (SPM): 0 – 2,800, Tool Length (in.): 17 1/3, Tool Weight (lbs.): 7, Case Included: YesAmazon.com Product Description
About this Sawzall Model
The 11 amp Sawzall from Milwaukee is durable and super light — weighing in at just 7 pounds, for the best power-to-weight ratio in its class. This small but tough saw offers a variable speed trigger that sends the blade from 0-2,800 strokes per minu… More >>
Milwaukee 650922 Sawzall 11 Amp Reciprocating Saw
Posted by
admin Date:
Sunday, May 9, 2010
Categories:
Table Saw
Tags:
650922, Milwaukee, Reciprocating, Sawzall
- Irwin Industrial tools makes Marathon circular saw blades for a full range of saws and applications.
- 400 Grit diamond ground teeth for a smooth finish
- Precision tensioned and balanced blade for an accurate cut
- Construction grade carbide teeth for longer life
- Thin kerf for fast cuts
Product Description
Specially formulated Ti Carbide teeth provide exceptional hardness and edge retention. Up to 10 times more durable than conventional carbide blades. Diamond wheel sharpened teeth are up to 3 times sharper than conventional teeth. No. 14233: 10″ 24T No. 14… More >>
Irwin Industrial Tools 14233 10-Inch 24-Teeth 5/8-Inch Arbor Miter and Table Saw Blade
Posted by
admin Date:
Sunday, May 9, 2010
Categories:
Table Saw
Tags:
10Inch, 14233, 24Teeth, 5/8Inch, Arbor, Blade, Industrial, Irwin, Miter, Table, Tools
- Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
- Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
- Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
Product Description
Super thin laser cut kerf (small diameter blades only) provides faster, cleaner, more exacting cuts. Perma Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact resistant to hold theAmazon.com Product Description
For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade’s large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips.
Model #D1050XDiameter10″Machine UseMiter Saw, Table SawApplicationCombinationTeeth50 ATB
(Alternate-Top Bevel)Arbor5/8″Kerf.098″Hook Angle15°
Makes Clean, Razor-Sharp… More >>
Freud D1050X Diablo 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating
Posted by
admin Date:
Saturday, May 8, 2010
Categories:
Table Saw
Tags:
10Inch, 5/8Inch, 50tooth, Arbor, Blade, Coating, Combination, D1050X, Diablo, Freud, PermaShield
- Sets up in seconds
- Folds for storage
- Universal for all competitor’s table saws
- Holds 500 pounds
- Stable, durable, and sturdy
Product Description
This is stable, durable and sturdy. It sets up in seconds and folds for easy storage. Used with Bosch 4000 10-inch worksite table saw and is universal for all competitor’s table saws…. More >>
Bosch TS1000 Table Saw Portable Folding Stand
Posted by
admin Date:
Saturday, May 8, 2010
Categories:
Table Saw
Tags:
Bosch, Folding, Portable, Stand, Table, TS1000
- Max Cut: 90º: 3/4″
- Blade Capacity: 4″ Inch
- Motor: 0.9 amps @ 110V 60Hz, 4500RPM
- Table: 7-1/2″ x 5 -1/2 x 6-1/2
- Content: Table Saw, 1 x 4″ 24 tooth Carbide Tip Blade & 1 x 4″ Diamond Blade
4″ Mini Table Saw Hobby Crafts 4500RPM w/ 2 Blades
Posted by
admin Date:
Friday, May 7, 2010
Categories:
Table Saw
Tags:
4500RPM, Blades, Crafts, Hobby, Mini, Table
Posted by
admin Date:
Friday, May 7, 2010
Categories:
Table Saw
Tags:
299.111.00, Balance, Blade, Bore, Disc, Sanding, Table
Posted by
admin Date:
Thursday, May 6, 2010
Categories:
Table Saw
Tags:
299.111.00, Balance, Blade, Bore, Disc, Sanding, Table
- Table saw insert supports work right up to the blade for smooth, more precise cuts
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- Made from high-density phenolic laminate with a bonded-melamine surface
- Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
- Leecraft’s lifetime warranty; designed for Rigid table saw with carbide-tipped blades only
Product Description
LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a “kerf” which precisely matches the blade on your saw. These 1/2″ thick inserts are precision machined from a nearly frictionless melamine faced, high density phenolic laminate. Offer durability and flatness unobtainable from cheaper plastic inserts. Features like top mounted set screws for precise leveling, front/side adjustment screws for perfect side to side and front to rear fit, and a rear safety pin that keeps the rear of the insert in place, make this the best insert we have ever seen. Sheet stock material (1/2″ x 11″ x 15″) is perfect for creating your own custom jigs and fixtures. Complete with instructions. Insert surface colors may vary.Amazon.com Product Description
The Leecraft Zero-Clearance Table Saw Insert supports work right up to the blade fo… More >>
Leecraft RG-1 Zero Clearance Table Saw Insert for Ridgid TS3650 Table Saw
Posted by
admin Date:
Thursday, May 6, 2010
Categories:
Table Saw
Tags:
Clearance, Insert, Leecraft, Ridgid, Table, TS3650, Zero
- Universal mobile base with 400-pound capacity; forms into squares or rectangles
- Four wheels; side rails with holes every inch; 12 by 12-inch to 36 by 36-inch or up to 20 by 52-inches
- Durable hard rubber wheels and metal; assembly required
- Includes wheels, base, and hardware
- 16-pounds; lifetime warranty
Product Description
Totally adjustable mobile shop base lets you move your tools without being locked into a fixed size! Expands from 12in. x 12in. to a 36in. x 36in. square or a 20in. x 52in. rectangle, or anything in between. Four-wheel design. Limited lifetime warranty. Load Capacity (lbs.): 500, Adjustable, Rollers (qty.): 4Amazon.com Review
If you’re like us, you’ve crammed more tools into your workshop than can really fit. Luckily, an HTC universal mobile base (or two) can make a world of difference. The base is sturdy and easy to assemble, plus–unlike any other mobile base on the market–it adjusts to fit virtually any large woodworking machine, forming squares from 12 by 12 to 36 by 36 inches and rectangles as big as 20 by 52 inches. Holes at 1-inch increments let you choose any shape in between, and wheels at all four corners make it easy to maneuver. Roll one tool in; roll another tool out. Moving equipment around a crowded shop has never been this easy. … More >>
HTC HTC2000 Universal Mobile Base
Posted by
admin Date:
Thursday, May 6, 2010
Categories:
Table Saw
Tags:
Base, HTC2000, Mobile, Universal
- Counter-balance is behind the Guard Basket, out of your line of site
- Guard basket can be positioned and locked into place or easily pushed completely out of the way
- In-feed and out-feed wheels on the guard basket will not mark the surface of your work piece
- Will accommodate a 16-Inch saw blade, raised 4-Inch above the table, tilted to 45-Degree
- Shipped complete – no extras to buy. A 4-Inch hose with 600-to-800-CFM dust extractor is recommended
Product Description
Features:Guard basket is equipped with in-feed and out-feed wheels. This allows the guard basket to roll up and over the work piece and position the guard basket the correct height above the work piece for optimum dust collection.Shuttered openings at the back of the guard basket allow for the use of splitter and anti-kick-back pawls provided with the user’s table saw.Bottom edge of the guard basket can be raised up 7″ above the saw table. If more height is required, the horizontal boom and guard basket can be swung out of the way.Easy installation:Only three tools are required to install: a 3/8″ electric drill, a screw driver and an adjustable wrench. The assembly instructions are included with the unit.Flexible installation options:The Exaktor blade cover can be attached to either the right or left-hand end, or back edge of a saw table up to 35″ high. The telescopic boom is adjustable to accommodate a rip fence extending up to 70″ from the saw blade. T… More >>
Exaktor EXOA-2 Table Saw Overarm Blade Cover and Dust Collector
Posted by
admin Date:
Wednesday, May 5, 2010
Categories:
Table Saw
Tags:
Blade, Collector, Cover, Dust, Exaktor, EXOA2, Overarm, Table
